بررسی عددی تأثیر جهت جریان بر برداشت انرژی از ارتعاش القایی در یک استوانه نیمه دایره ای گرم با قطاع
پذیرفته شده برای ارائه شفاهی ، صفحه 1-8 (8)
کد مقاله : 1056-ISAV2022 (R2)
نویسندگان
1گروه آموزشی مکانیک
2گروه مکانیک دانشگاه خیام
3مهندسی مکانیک دانشکاه خیام
چکیده
In the presence of buoyancy, a two-dimensional computer simulation explores flow and heat around low-mass arched forebodies (AF), flat forebodies (FF), and circular cylinders (CC). The Prandtl number of 0.71, the Reynolds number of 100, and the Richardson number of 1.5 are all used in this investigation. Selecting five semi-circular cylinders with various length-to-diameter ratios (L*=L/D) aims to investigate the influence of L* on energy harvesting. Our goal is to determine a bluff body that captures maximum energy through more vibration. Having compared some of the outcomes of present work with other studies, a good agreement is achieved to validate the simulations. Energy harvesting is augmented when Richardson numbers are prescribed higher. Not having applied buoyancy force, the circular cylinders with L* of 0.5 and 0.6 for the flat forebody configuration gain the highest extracted power at Reynolds numbers of 100 and 200, respectively, resulting in 3.5 and 5.3 more times extracted power. Moreover, the flat forebody configuration always brings about more harvested energy compared to the same body with opposite flow direction. As a result of these findings, we can gain a deeper understanding of the characteristics of thermal systems able to dissipate heat loads as well as produce maximum power output.
کلیدواژه ها
Title
Numerical study of the Impact of the Flow Direction on Energy Harvesting from Induced Vibration in a Heated Semi-Circular Cylinder
Authors
Ebrahim Barati, Mehdi Rafati, Mohsen Biabani
Abstract
In the presence of buoyancy, a two-dimensional computer simulation explores flow and heat around low-mass arched forebodies (AF), flat forebodies (FF), and circular cylinders (CC). The Prandtl number of 0.71, the Reynolds number of 100, and the Richardson number of 1.5 are all used in this investigation. Selecting five semi-circular cylinders with various length-to-diameter ratios (L*=L/D) aims to investigate the influence of L* on energy harvesting. Our goal is to determine a bluff body that captures maximum energy through more vibration. Having compared some of the outcomes of present work with other studies, a good agreement is achieved to validate the simulations. Energy harvesting is augmented when Richardson numbers are prescribed higher. Not having applied buoyancy force, the circular cylinders with L* of 0.5 and 0.6 for the flat forebody configuration gain the highest extracted power at Reynolds numbers of 100 and 200, respectively, resulting in 3.5 and 5.3 more times extracted power. Moreover, the flat forebody configuration always brings about more harvested energy compared to the same body with opposite flow direction. As a result of these findings, we can gain a deeper understanding of the characteristics of thermal systems able to dissipate heat loads as well as produce maximum power output.
Keywords
Buoyancy force, Flow- induced vibration, Energy harvesting
مراجع
<p>1. H. Wan, J. A. D. Roches, A. N.Palazotto, S. S.Patnaik, Vortex-induced vibration of elliptic cylinders and the suppression using mixed-convection, Journal of Fluids and Structures 103, 2021, 103297.</p>
<p>2. X. Ma, S. Zhou, A review of flow-induced vibration energy harvesters, Energy Conversion and Management 254, 2022, 115223.</p>
<p>3. P.Jadidi M.Zeinoddini, Influence of hard marine fouling on energy harvesting from Vortex-Induced Vibrations of a single-cylinder, Renewable Energy 152, 2020, 516-528.</p>
<p>4. M. Zhang, C. Zhang, A. Abdelkefi, H. Yu, O. Gaidai, X. Qin, H. Zhu, J. Wang, Piezoelectric energy harvesting from vortex-induced vibration of a circular cylinder: Effect of Reynolds number, Ocean Engineering 235, 2021, 109378.</p>
<p>5. H. Sun M. M.Bernitsas M. Turkol, Adaptive harnessing damping in hydrokinetic energy conversion by two rough tandem-cylinders using flow-induced vibrations, Renewable Energy 149, 2020, 828-860.</p>
<p>6. L. Ding, L. Zhang, Ch. Wu, X. Mao, D. Jiang, Flow induced motion and energy harvesting of bluff bodies with different cross sections, Energy Conversion and Management 91, 2015, 416-426.</p>
<p>7. H. Arionfard, Y.Nishi, Experimental investigation on the performance of a double-cylinder flow-induced vibration (FIV) energy converter, Renewable Energy 134, 2019, 267-275.</p>
<p>8. V. Bagherian, M. Salehi, M. Mahzoon, Rigid multibody dynamic modeling for a semi-submersible wind turbine, Energy Conversion and Management 244, 2021, 114399.</p>
<p>9. A. Sharma, V. Eswaran, Effect of aiding and opposing buoyancy on the heat and fluid flow across a square cylinder at Re = 100, Numerical Heat Transfer, Part A 45, 2004, 601–624.</p>
<p>10. S. Singh, D. Chandar, Effects of thermal induced buoyancy forces on the vortex shedding of a circular cylinder, International Communication in Heat and Mass Transfer 76, 2016, 215–224.</p>
<p>11. S. Rashidi, M. Hayatdavoodi, J. A. Esfahani, “Vortex shedding suppression and wake control: A review,” Ocean Engineering 126, 2016, 57–80.</p>
<p>12. M. K. Sukesan and A. K. Dhiman, “Laminar mixed convection in a channel with a built-in semi-circular cylinder under the effect of cross-buoyancy,” Int. Commun. Heat Mass Transfer 58, 2014, 25–32.</p>
<p>13. S. Singh and D. Chandar, “Effects of thermal induced buoyancy forces on the vortex shedding of a circular cylinder,” Int. Commun. Heat Mass Transfer 76, 2016, 215–224.</p>
<p>14. H. Garg, A. K. Soti, and R. Bhardwaj, A sharp interface immersed boundary method for vortex-induced vibration in the presence of thermal buoyancy, Phys. Fluids 30, 2018, 023603.</p>
<p>15. Al-Sumaily GF, Dhahad HA, Hussen HM, Thompson MC. Influence of thermal buoyancy on vortex shedding behind a circular cylinder in parallel flow. International Journal of Thermal Sciences, 2020, 156.</p>
<p>16. V.Tamimi , J.Wu , M.J.Esfehani, M.Zeinoddini , S.T.O.Naeeni Comparison of hydrokinetic energy harvesting performance of a fluttering hydrofoil against other Flow-Induced Vibration (FIV) mechanisms, Renewable Energy186, 2022, 157-172.</p>
<p>17. Zh. Zhou, W. Qin, P. Zhu, W. Du, Harvesting more energy from variable-speed wind by a multi-stable configuration with vortex-induced vibration and galloping, Energy 15, 2021, 121551.</p>
<p>18. M. Belloli, S. Giappino, S. Morganti, S. Muggiasca, A. Zasso. Vortex induced vibrations at high Reynolds numbers on circular cylinders. Ocean Engineering 94, 2015, 140.</p>
<p>19. J. Xu-Xu, A. Barrero-Gil, A. Velazquez. Dual mass system for enhancing energy extraction from Vortex-Induced Vibrations of a circular cylinder. International Journal of Marine Energy 16, 2016, 250.</p>
<p>20. E. Barati, M. Biabani, M. R. Zarkak, Numerical investigation on vortex-induced vibration energy harvesting of a heated circular cylinder with various cross-sections, International Communications in Heat and Mass Transfer 132, 2022, 105888.</p>
<p>21. L.C. Pagnini, G. Piccardo, G. Solari. VIV regimes and simplified solutions by the spectral model description Journal of Wind Engineering & Industrial Aerodynamics 198, 2020, 104100.</p>
<p>22. Bourguet, Rémi and Karniadakis, George E. and Triantafyllou, Michael S. Lock-in of the vortex-induced vibrations of a long tensioned beam in shear flow, Journal of Fluids and Structures 27, 2011, 838-847.</p>
<p>23. Asim Ozan Mutlu, Meral Bayraktar, Seyfettin Bayraktar, Two-dimensional simulations of vortex-induced vibration of a circular cylinder, Proceedings of the Institution of Mechanical Engineers Part M Journal of Engineering for the Maritime Environment 235, 2021, 683–694.</p>
<p>24. R.S. Rajpoot, K. Anirudh, S. Dhinakaran. On the effects of orientation on flow and heat transfer from a semicircular cylinder near a stationary wall. Case Studies in Thermal Engineering, 2021, 100967.</p>
<p>25. P. Anagnostopoulos, P. W. Bearman. Response characteristics of a vortex-excited cylinder at low Reynolds numbers. Journal of Fluids and Structures 6, 1992, 39-50.</p>